How to fix a considerable drop in water pressure in BWT Infinity A+AP Water Filtration Systems?
If the water pressure in your network has dropped considerably when using a BWT Water Filtration System, it might be due to a dirty filter element. Try performing a backwash to resolve this.
What to do if the flushing water outlet does not close in BWT Water Filtration Systems?
If the flushing water outlet on your BWT Water Filtration System does not close, it could be due to large particles of dirt preventing the backwash element from reaching the end position. Try repeating the backwash several times. Alternatively, unscrew the wastewater connection and clean the vent tube outside.
Why does my BWT Infinity A+AP Infinity AP display show ERR?
If the BWT Water Filtration System's display shows ERR, it might be due to low pressure. Try repeating the backwash several times and increase the pressure.
General| Brand | BWT |
|---|---|
| Model | Infinity A+AP |
| Category | Water Filtration Systems |
| Language | English |
To Next Page