21
EN
To avoid damage during transport to the installation
location, do not remove the BWT product from the
packaging until you have reached the relevant loca-
tion. Then dispose of the packaging in the correct
manner.Checkthatthedeliveryiscomplete.
If there is a risk of frost, drain all components that
convey water.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points, if present.
The product must be installed or mounted on a suf-
cientlystrongandlevelhorizontalsurfaceandmust
be adequately secured against falling or tipping.
This symbol indicates general
risks due to the mains voltage.
Risk of death by electric shock!
This symbol indicates that this
electrical and electronic equip-
ment must not be disposed of
with household waste at the end
of its life.
This symbol indicates that the
product can be recycled at the
end of its life.
This symbol indicates informati-
on or instructions that you must
observe in order to ensure safe
operation.
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sonsordamagetoproperty.Allhazardprevention
measures must be followed.
Safety instructions are displayed as follows:
Source of hazard
(e.g. electric shock)
Type of hazard (e.g. risk of fatal
injury)!
► Escape or prevent hazard
► Rescue measure (optional)
Indicates the severity
ofthehazard
Callsattention to the
hazard
Indicates the type
and the source of the
hazard
Explains the conse-
quences of not follow-
ing the safety instruc-
tions
Explainshowtoavoid
thehazard
To Next Page
Loading...
Need help?
General
