Overall structure
BYD Battery-Box HV
QUICK REFERENCE GUIDE
Valid for Battery-Box H 5.1/6.4/7.7/9.0/10.2/11.5
Tools
V 5
Skilled personnel recognized
This manual and the tasks and procedures described herein are intended for use by skilled workers only.
A skilled worker is defined as a trained and qualified electrician or installer who has all of the following skills and expenence:
• Knowledge of the functional principles and operation of on-grid systems.
• Knowledge of the dangers and risks associated with installing and using electrical devices and acceptable mitigation methods.
• Knowledge of the installation of electrical devices.
• Knowledge of and adherence to this manual and all safety precautions and best oractices.
Target Group
Installation environment requirements
Max.
+50℃
Min.
-10℃
Flammable material or
gas near the installation
Flammable wall
RH.
+5%~+95%
Packing list
Packing of BCU+BASE
Packing of B-Plus H 1.28
⑥
Sealing plug white ×2
② Wall-mounted ×1
③ Expansion bolt M6×2
④ Sealing plug black ×3 ⑤ Sealing plug white ×3
BCU
Base
B-Plus H 1.28
Direct sunlight
Direct rain fall
Snow
accumulation
YES YES
NO NO
YES
NO
NO
NO
①M4×3
• In order to ensure the normal operation of Battery-Box, please be sure to update the firmware to the latest version and finish the configuration on
Battery-Box webpage in accordance with this document.
• The system switch must be off before installing.
• Please make sure the system switch is off in case of the system not working, and it would be better to repair it again within one week, avoiding
overdischarge or other problems happen.
• Please do not stack up batteries without protective package when storing or handling batteries, unless in the case of installation.
• Please read the quick reference guide and installation manual carefully before installation.
• Please download and view the installation manual on this website:
www.eft-systems.de(Support->Downloads)
Please refer to the BYD minimum Configuration List and to the inverter information
regarding the possible module configuration (n) with different Inverters.
n=5, 6.4KWh
n=6, 7.7KWh
n=7, 9.0KWh
n=8, 10.2KWh
n=9, 11.5KWh
Allen key Wire clamp Phillips screwdriver levelling instrument open-ended wrench churn drill
n=4, 5.1KWh
To Next Page
Need help?
General
