Need help?Do you have a question about the BYD Battery-Box Premium LVL 15.4 and is the answer not in the manual?
General| Nominal Capacity | 15.36 kWh |
|---|---|
| Nominal Voltage | 51.2 V |
| Usable Capacity | 15.36 kWh |
| Operating Temperature Range | -10°C to +50°C |
| Communication Interface | CAN / RS485 |
| IP Rating | IP55 |
| Battery Type | Lithium Iron Phosphate (LFP) |
| Cycle Life | 6000 cycles at 80% DoD |
| Scalability | Up to 64 units in parallel |
General safety guidance to prevent personal injury, property damage, and ensure long-term operation.
Provides actions to take if battery electrolytes leak, warning of corrosive effects and burns.
Specifies appropriate fire extinguishers and required protective gear for firefighters.
Guidelines for safe handling, lifting, and storage conditions to prevent damage and injury.
Highlights risks from overvoltages and the necessity of surge protection for safety.
Advises contacting service for undervoltage issues to prevent permanent damage to the system.
Lists essential requirements for the installation location, environment, and altitude.
Provides step-by-step instructions for the installation of a single battery system unit.
Details the procedure for stacking up to two battery systems to form a single stack.
Outlines requirements and initial steps for powering on and verifying the battery system.
Guide to using the Be Connect app for firmware updates and system configuration.
Steps for commissioning the connected inverter after the battery system is set up.
Lists BMU error codes indicated by specific patterns of blue LED flashes.
Lists BMS error codes indicated by specific patterns of blue LED flashes.
To Next Page
