Need help?Do you have a question about the BYD Battery-Box Premium HVS 10.2 and is the answer not in the manual?
General| Usable Energy | 10.24 kWh |
|---|---|
| Operating Temperature Range | -10°C to +50°C |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Communication | CAN / RS485 |
| IP Rating | IP55 |
| Warranty | 10 years |
| Scalability | Up to 6 modules in parallel |
| Certifications | CE, IEC 62619, UN38.3 |
| Cycle Life | 6000 cycles |
Crucial safety guidelines for preventing injury and damage.
Actions to take in case of electrolyte leakage from battery modules.
Procedures and equipment for fighting battery module fires.
Hazards and precautions related to electric shock.
Symbols warning of electrical voltage and danger zones.
Defines limits for series and parallel connections of battery modules.
Steps for preparing the base, positioning BCU, and wall mounting.
Guidance on assembling and stacking the battery modules.
Instructions for connecting BCU, module data cables, and communication cables.
Illustrates the overall connection of the inverter, BCU, and battery system.
Guides through preparing and connecting the grounding conductor.
Pre-connection checks and steps for connecting communication cables.
Steps for connecting the network cable to the BCU.
Detailed steps for connecting DC cables to the BCU and battery modules.
Procedure for switching on the battery system.
Sequence for starting up the battery system and inverter.
Sequence for shutting down the battery system and inverter.
To Next Page
