Need help?Do you have a question about the BYD Battery-Box HV and is the answer not in the manual?
General| Enclosure Material | Steel |
|---|---|
| Protection Rating | IP55 |
| Weight | Varies by model (e.g., 88 kg for HV 7.7) |
| Category | High Voltage Battery Storage System |
| Compatible Battery | BYD Battery-Box HV Modules |
| Max. Continuous Charge/Discharge Power | 5 kW |
| Peak Power (10s) | 7 kW |
| Operating Temperature Range | -10°C to +50°C |
| Storage Temperature Range | -20°C to +60°C |
| IP Rating | IP55 |
| Cooling | Natural Convection |
| Efficiency | 95% |
| Cycle Life | 6000 cycles |
| Communication Interface | CAN |
| Certifications | IEC 62619, UN 38.3, CE |
Overview of package list, detailing components like Power Cable, Charging cable, DC Charger, and Block.
Describes connecting BYD Battery-Box modules to the charging system and grid for operation.
Details on turning on the charger, setting ChgSoc, and starting the charging process with LED indicators.
Explains warnings indicated by buzzer and red LED, advising to check the LCD menu for details.
Illustrates the LCD panel layout, including status indicators and navigation buttons.
Explains the functions of KEYUP, KEYDOWN, and KEYENTER buttons for menu navigation and confirmation.
Describes the meaning of Green, Yellow, and Red LED lights indicating charging, reserved status, and alerts.
Details that the LCD screen displays information, operating windows, configuration parameters, and abnormal status.
Presents a hierarchical view of the charger's menu structure for system information and settings.
Guide on selecting the correct battery type to ensure proper charger operation and avoid issues.
Details the recommended AUTO Charge method, including setting SOC and starting the charging process.
Explains Charge/Full/Alert/Off states, ON/OFF relay status, and real-time voltage and current readings.
Describes how to access the battery module's serial number (SN) from the LCD menu.
Details BatCom status for charger-battery communication and Temp status for cell temperature monitoring.
Shows how to check the total battery module voltage (BatVol) and current state of charge (SOC).
Details how to view the minimum (VOLMIN) and maximum (VOLMAX) cell voltages.
Explains how to check the minimum (TempMIN) and maximum (TempMAX) cell temperatures.
Describes how BatSta indicates battery state and circuit connection status, flagging issues like low cell voltage.
Guide on navigating back to previous pages from the main menu using the enter key.
Covers setting charging parameters and viewing battery cell voltage within the main menu options.
To Next Page
