BYD e6A AUTO Owner's Manual
Doors and Keys 1-21
Replace Electronic Intelligent Key Battery
Replacement of the battery may damage the
key. It is recommended to have a BYD
authorized service station replace the battery.
If you have to replace it by yourself, please
use a flat screwdriver and CR1632 lithium
battery or equivalent.
Pay close attention to prevent the battery or
components from being swallowed by
children.
Do not touch the circuit with your
hands, otherwise the static produced
may damage the key.
Do not leave out any components
when replacing the key battery.
Only use batteries recommended by
BYD service station or their
equivalent for replacement.
Dispose of depleted batteries
according to local laws.
Replace the electronic intelligent key battery
in the following steps.
a. Pull down release switch and take out
mechanical key.
b. Open electronic key cover with a flat
screwdriver or similar tools.
c. Remove the depleted electronic intelligent
key with a flat screwdriver or similar tools.
Insert the tool into the guide groove and
apply force in the direction shown in the
figure above to remove the battery.
To Next Page
Loading...
