BYD e6A - Page 40

BYD e6A AUTO Owner's Manual
1-22 Doors and Keys
d. Put the battery with positive terminal (+) on
the top into the battery box, then firmly
install the cover of the electronic intelligent
key and insert the mechanical key into the
electronic intelligent key.
After battery replacement, check whether the
electronic intelligent key works normally. If it
still does not work, please contact a BYD
authorized service station.
NOTE
 Do not amend the battery cover to
avoid fault.
 Make sure that the battery poles are
installed properly.
 Do not operate the battery with wet
hands, which may cause rusting.
 Do not touch or move any component
or part inside the electronic key,
otherwise its normal function may be
affected.
 Take care not to bend the terminals
when inserting the battery. The
battery box must be free of dust or oil
taint.
 Reinstall the key cover firmly.
Intelligent Access and Starting
System
The intelligent access and starting system has
the following main features.
● Wireless remote control function (See
"Wireless Remote Control" in this Section
for details)
● Access function and starting function (see
"Access Function and Starting Function" in
this Section)
● Steering lock function (refer to "Steering
Lock Function" in this Section)
● Button Starting function (for details, please
see "Vehicle Starting Method" in this
Section)
WARNING
● People with heart pacemakers and
defibrillators must be kept away from the
antenna of intelligent access and
keyless starting system, as
electromagnetic waves may affect
normal use of these devices. For
information on the position of the
antenna, please refer to "Antenna
Position" in this section.
● Drivers with heart pacemakers and
defibrillators and people using other
medical electronic devices must ask the
manufacturer about interference posed
by electromagnetic waves to these
devices. Electromagnetic waves may
cause unexpected results to these
devices.