BYD F3DM - Page 104

- 104 -
F3DM Owner’s Manual
pressed, the indicator goes on
indicating that automatic operation
status is selected.
In automatic operation status, air-
conditioning device will, according to
the set temperature, select a proper
rotating speed for fan and airflow
direction and automatically control the
rotating speed of compressor and PTC
power to get the temperature in car
reaching the set temperature rapidly.
To select your own setting, you can
control it manually.
To exit automatic operation, press
“OFF” button, blower speed-regulating
button, “MODE” button or front
defrosting switch.
5.“OFF”: air-conditioner OFF button
Press this button to turn off the air-
conditioning system.
6.Internal-External recycling mode
selecting button
Press this button to select airflow
source of air-conditioning system.
1) Internal Recycling – press this
button, the indicator will go on to
enable air circulation in the car, speed
up cooling or heating the inside and
prevent dirty air outside from entering
the car.
2) External Recycling – Repress this
button, the indicator will go off to
introduce fresh air outside into the car
for circulation.
7.“MODE”: air outlet mode selecting
button
To select airow direction, please press
air outlet mode selecting button.
In automatic operation mode, the
airflow is not required to be adjusted,
unless other airflow modes are
使用手册小330.indd104 2011-4-1318:36:49