BYD F3DM - Page 150

- 150 -
F3DM Owner’s Manual
Remove: rotate the terminal in direction
1 until the jack becomes exible.
Storage: rotate the terminal in direction
2 until the jack is xed tightly to prevent
it from being thrown forward when
there is crash or emergency braking.
Loosen and remove the spare tire
carrier, then take out the spare tire.
To store the tire, please put the outside
of the tire downward in place, and then
fasten the tire in the opposite order to
prevent it from being thrown forward
when there is a crash or emergency
braking.
Note: when fastening the original tire
of the car with methods of fastening
the spare tire carrier, please put the
side with higher convex plate facing
upwards.
Block Wheels
2. While lifting, please lay the block
under the wheel in the diagonal
direction of the flat tire to prevent the
car sliding.
Put the block in front of a front wheel
or behind a rear wheel.
使用手册小330.indd150 2011-4-1318:36:52