DA3N User's Manual
19
When the input signal is detected the sampling frequency is displayed at
Ⓑ
.
❹
After the sampling frequency is displayed, start the playback of the
selected digital audio device.
❺
Increse the volume.
❻
Select a digital lter FLAT or PULSE. FLAT features liner frequency up
to 20kHz. When selecting FLAT "F" is displayed at
Ⓒ.
PULSE features soft
treble roll off and ringing free playback resulting in wider sound stage and
dynamic sound. During PULSE "P" is displayed.
●
SUPERLINK
（
BNC or D-SUB 9) Operation
❼
When CD transport is connected with DA3N via SUPERLINK, external
44.1kHz master clock can be used. When the master clock is linked, "M" is
displayed at
Ⓓ
.
Note: An external master clock works with DA3N only when SUPERLINK
is used.
To Next Page
Loading...