9
Non Motion Mode (see diagram 6):
1. Select NON MOTION mode on the trigger switch (central position 3 in diagram 6).
2. Now pass a coin over the head and notice how the detector gives a signal all the time the
coin is within a certain distance.
3. Your CS4ZX is built with the latest technology but it will be necessary to retune your
detector from time to time by momentarily flicking into postition 1 in diagram 6. This will
counteract any drift and recentralise the meter.
Diagram 6 Settings For Non Motion Mode - Meter Discrimination
CONTROLS
Diagram 7 Control Layout
2 1
OFF
ALL
METAL
CS4ZX
METER
DISC
To Next Page
Loading...
