EasyManuals Logo

C.T.M. HS-928 Instruction Booklet

C.T.M. HS-928
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Instruction Booklet9-Series
Always ensure that the scooter is switched
off before getting on or off the scooter and
before removing any items of the scooter
Turning the scooter OFF whilst driving will
bring the scooter to an abrupt stop and
danger.
6
FUNCTION OF PARTS
Main Key Switch (A)
1.Turn the key to the right - Turn the scooter on
2.Turn the key to the left - Turn the scooter off
TOP CONTROL PANEL
Hazard Light (B) : Switch on by pressing once, switch
off by pressing again. Press hazard light button once,
the right/left lights and parking indicator start to flash,
warning tone acts as well; If the Hazard lights are activated,
with the key switched to the on position, the lights will
continue to flash even when the key is switched off. The
Hazard light button should be depressed to cancel the flashing.
Mode (C) : Change mode by pressing once
a. Clock
b. Temperature
c. Speedometer
d. ODO
e. Tr
ip Meter
Horn (D) : Press horn button once to sound warning tone when necessary.
Left Turn Signal (E) : Press Left Turn Signal button once, the front and rear left turn
indicators start to flash, and warning tone sounds simultaneously;
press button again to switch off the turn indicators/signal and tone.
Right Turn Signal (G) : Press Right Turn Signal button once, the front and rear right
turn indicators start to flash, and warning tone sounds simultaneously;
press button again to switch off the turn indicators/signal and tone
Headlight (F) : Press headlight button once to switch on, switch off by pressing again.
Acceleration (H) : Press acceleration button once to increase speed, fine tune in 1'5
speeds.
Deceleration (J) : Press acceleration button once to decrease speed, fine tune in 1'5
speeds.
Hi/Lo Switch (I) : Press H/L Speed button once, the High/Low Speed Indicator will
light on, means driving in high speed mode; Press again, the indicator
will extinguish means driving in low speed mode.
(Hi/Lo speed will vary depend on your current speed settings)
Figure 4
Figure 4
(A)
Figure 5
Figure 5
(B)
(C)
(D)
(E) (F) (G)
(H)
(I)
(J)

Other manuals for C.T.M. HS-928

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the C.T.M. HS-928 and is the answer not in the manual?

C.T.M. HS-928 Specifications

General IconGeneral
BrandC.T.M.
ModelHS-928
CategoryScooter
LanguageEnglish

Related product manuals