GB
49
1. First use or after a long period of disuse
1.1 Clean and rinse the percolator, coffee basket, lid and
percolating tube with hot water. Let the parts dry.
1.2 Boil water in the percolator, with the percolating tube and
coffee basket in place, until the lamp goes on.
1.3 Pour the water from the percolator. Shut off and unplug it.
Let the percolator cool off before brewing.
Note: Never immerse the percolator, base plate or the power
cord in water.
2. Coffee brewing
Check that the power cord is unplugged.
2.1 Lift the percolator away from its base and ll with desired
amount of water.
2.2 See the water level indicator at the handle or the level
marking inside the percolator*. Always ll with at least 2
cups in our smaller percolators and 4 cups in our larger
model for best result. Less water could lead to risk of dryout.
2.3 Measure (1 for each cup) and pour coffee into the coffee
basket. Distribute the coffee evenly and put on the lid of the
coffee basket.
2.4 Fit the coffee basket onto the percolating tube. Put the
parts together in the percolator.
2.5 Ensure that the percolating tube, together with coffee
basket and lid, are placed in the center of the percolator.
2.6 Press on the percolator lid proper and put the percolator on
the base plate.
* Note: The level indicator shows 1.4 dl/cup in the small percolator
and 1.5 dl/cup in the larger.
To Next Page
Loading...