GB
50
2.7 Plug the mains cord to an earthed wall socket.
2.8 To start brewing, push the power swith to ”ON”. The
brewing starts when the base plate indicator lamp lights up.
2.9 The coffee is ready when the indicator lamp on the
percolator lights up.
2.10 The power switch automatically turns off 40 minutes after
brewing has started. Remove the plug from the electrical
outlet after use.
Important that the appliance is unplugged until the percolator
is ready for brewing and the percolator lid is properly put on.
Always keep an eye on the percolator during brewing.
3. Warming
Avoid warming of an empty percolator, this could result in
dryout.
3.1 The power switch automatically turns off 40 minutes after
brewing has started.
3.2 Always take out the percolating tube and the coffee basket
from the percoaltor before warming up cold coffee.
3.3 Unplug the appliance after use.
4. Care and cleaning
Always unplug the percolator before cleaning. Never immerse
the percolator, the base plate or power cord in water or other
liquid. Do not use a dishwasher to clean the parts.
4.1 Always clean the percolator after use. Even small quantities
of coffee grounds can impair the avor of coffee during next
brewing.
4.2 Carefully clean the percolating tube and the washer at the
bottom of the tube. The washer must move freely.
To Next Page
Loading...