CA.MI KIWI Plus - Page 39

39
Manufacturer's guide and declaration - Electromagnetic Emission
The KIWI Plus aerosol is for use in the below specified electromagnetic environment. The Customer and/or
user of the KIWI Plus aerosol must ensure that the device is used in such an environment
Emissions Test
Conformity
Guide to the electromagnetic environment
CISPR11 Radiated /
Conducted Emissions
Unit 1
The KIWI Plus aerosol uses RF energy only for its internal
operation. Therefore, its RF emissions are very low and do
not cause any interference with any nearby electronic
device.
CISPR11 Radiated /
Conducted Emissions
Class [B]
The KIWI Plus aerosol is suitable for use in all
environments, including domestic, and those directly
connected to the public distribution network providing
power to environments used for domestic purposes.
Harmonic EN 61000-3-2
Class [A]
Voltage fluctuations /
flicker EN 61000-3-3
Compliant