What to do if my CAB Printer prints a series of characters instead of the label format?
If your CAB Printer prints a series of characters instead of the label format, it might be in Monitor mode. To resolve this, exit Monitor mode.
Why is the print image blurred or missing in places on my CAB Printer?
If the print image from your CAB Printer is blurred or missing in places, there might be several reasons: * The printhead could be dirty. * The temperature might be too high; decrease the temperature via software. * You might have an unfavorable combination of labels and transfer ribbon; try using another ribbon type or brand.
What to do if my CAB Printer transports the label medium, but not the transfer ribbon?
If your CAB Printer transports the label medium but not the transfer ribbon, it could be due to: * The transfer ribbon being loaded incorrectly; check the course of the transfer ribbon and the orientation of the covered side, correcting if necessary. * An unfavorable combination of labels and transfer ribbon; try using another ribbon type or brand.
General| Print Method | Thermal transfer |
|---|---|
| Resolution | 203 dpi |
| Interfaces | USB, Bluetooth |
| Memory | 8 MB |
| Sensors | Label gap sensor, black mark sensor |
| Options | Cutter |
To Next Page
