To Next Page

To Previous Page

The Info function provides an overview of important status information on the display of the printer.

 Start menu.

 Select Info.

 Return with Close.

The following parameters are displayed:

Line Meaning Example

1 Printer type

Versionnumberandcreationdateofthermware

SQUIX 4/300

Firmware V5.13

Dec 18, 2017

2 IPv4 address of the printer when connected to a network via Ethernet

MAC address of the network adapter on the PCB CPU

Ethernet

IPv4 10.20.2.42

MAC 00:02:e7:05:cb:bf

3 IPv4 address of the printer when connected to a network via Wi-Fi

MAC address of the Wi-Fi adapter

Wi-Fi

IPv4 192.168.10.1

MAC e8:4e:06:3e:72:26

4 Zeroconf host name mDNS

cab-05cbbf.local

5 Operative time and number of printed labels Hours/no. of labels

150h/1208

6 Previously printed paper lengths with thermal direct printing / thermal

transfer printing

Thermal/Transfer

29.04m/32.52m

7 Resolution, number of dots and revision of the printhead Printhead

300dpi, 1248dots

Rev. 2.1.0

8 Results of the label sensor calibration Label sensor

Brightness 13-38

9 Serial number of the PCB CPU, Revision of PCB CPU and the FPGA PCB

S/N 164162036456

PCB Rev. 0

FPGA Rev. 13

Table 3 Info display

4 Info

CAB EOS5 Configuration Manual

Other manuals for CAB EOS5