Why is communication via the interface not functioning on my CAB Label Maker?
If communication via an interface is not functioning on your CAB Label Maker, ensure the interface configurations of the printer and computer match. For an Ethernet connection, verify the IP address and subnet mask. Inspect the interface cable for damage and replace it if needed. If the interface has completely lost functionality, consider replacing the PCB CPU.
What to do if there is no display function on CAB Label Maker?
If your CAB Label Maker's display isn't functioning, first check the cable connection between the PCB CPU and the control panel. If the connection is secure, try replacing the control panel. If the issue persists, the PCB CPU may need to be replaced.
How to troubleshoot a peripheral device that is not functioning on my CAB Label Maker?
If a peripheral device isn't functioning with your CAB Label Maker, first check whether the device is activated via programming. Next, inspect the peripheral device itself for any issues. If problems persist, consider replacing the PCB CPU.
General| Brand | CAB |
|---|---|
| Model | EOS5 |
| Category | Label Maker |
| Language | English |
To Next Page
