25
Network Services
Parameter Meaning Default
FTP Activation of the File Transfer Protocol On
LPD Activation of the network printing service LPD On
RawIP Activation of the network printing service RawIP and selection of the port
address
On
> RawIP Port Selection of the port address for RawIP 9100
> RawIP Timeout Setting the timeout for the interruption of unused connections Default
Website Activation of the Hypertext Transfer Protocol for the access to the
internal printer website
On
Web service Activation of the Simple Object Access Protocol Off
SNMP Data exchange between printer and management station via Simple
Network Management Protocol
Off
> SNMP community Keyword to assign the SNMP rights
public
VNC server
Activation of the VNC server for remote access to the control panel Off
Zeroconf
Activationoftheauto-conguringZeroconfmethodforadhocnetworks On
OPC UA
Activation of the protocol OPC UA for multi-vendor machine to machine
communication
Off
Table 13 Parameters of the Setup > Interfaces > Network services menu
RS-232
Parameter Meaning Default
Baud rate Speed (in Baud) of data transfer 115.200
Handshake Data transfer protocol RTS/CTS
Table 14 Parameters of the Setup > Interfaces > RS-232 menu
Note!
The following parameters cannot be changed: Data bits: 8, Stop bits: 1, Parity: None
I/O
Access only with I/O interface installed!
Not at MACH 4S and EOS!
Note!
The content of the menu is depending on the installed interface and described in the documentation of the
interface.
6 Conguration
To Next Page
Loading...
Need help?
General
