06
24
S ET UP
THE CROSSBOW CONTROL SYSTEM WITH OVERRIDE
THE Crossbow CONTROL SYSTEM with Override
The Crossbow Control System is a control system specifically for The Crossbow kites.
Components
- CONTROL BAR with end fittings and Powerlock loop
- De-power Line with QRS
- Override Ball
- Override Sleeve
- Bar floats with integrated Compound depower pulleys
- 27cm Harness Loop with Security Pin (23cm, 30cm, and 33 also available)
- Leader Lines (2) (yellow = left ; black = right)
- Centerline Adjustment Strap with Power adjustment extensions
- Emergency Shutdown ball
Tips
• Your kite should be tuned so that when the rider is unhooked from the harness line the kite is fully sheeted in (powered),
but not over sheeted.
• You may fine-tune the power of the kite with the Centerline Adjustment Strap.
• See the section on 4-Line Tuning for more explanation of 4-line kite tuning capabilities.
To Next Page
Loading...