Why is the flame completely yellow on my Cadac Grill?
If the flame on your Cadac Grill is completely yellow, it could be due to a jet that isn't securely fitted. Try re-tightening the jet to ensure there is no gas leakage. Another possible cause is an overfilled gas cylinder. If you suspect this, return the cylinder to the filling station to have its weight checked.
Essential safety guidelines for using the gas appliance to prevent accidents and ensure proper operation.
Instructions for lighting the appliance using the automatic igniter and procedure for re-lighting.
Guidance on lighting adjacent burners from an already lit burner for sequential ignition.
Steps for manually lighting the burners using a match or firelighter and replacing parts.
Steps for connecting, changing, and leak testing the gas cylinder and regulator for safe operation.
Procedure for removing, cleaning, and replacing a blocked jet in the burner assembly.
Guidance on checking and replacing the gas hose, including length and compliance requirements.
Information on the correct regulator to use and ensuring a tight connection with the low-pressure hose.
Guidance on identifying and resolving common problems like flame issues, obstructions, and low gas supply.
Methods for cleaning the appliance body, stainless steel surfaces, and preventing rust and damage.
Recommendations for storing the appliance safely and properly to maintain its condition.
To Next Page
General