XAM500.4BT
1.Line Input RCA Jacks: These inputs are for signal cables
from the source.
2.High Level Input: If your head unit does not have RCA
3.Output RCA Jacks:
To audio Inputs of satellite amplifier(if present).
outputs, use the speaker outputs for the audio source.
4.Smart Turn On: Turn on by headunit remote or high level input
auto start.
5.Power & Protection Indicators: The bi-color LED glows
green when power is on and no problems are present.
If one of the protection circuits comes on, it will change
to red.
1.Input Level Control: Enables the matching of input levels to
the output levels from the source.
2.Variable Bass Boost: 0~12dB
3.Low Pass Filter: Variable from 50Hz to 150Hz
4.Crossover Mode: Low pass, Full range or High pass
5.High P
7.Controlled feature via handset Bluetooth connection:
ass Filter: Variable from 50Hz to 150Hz
6.Bluetooth:
* Surface Mounted Antenna for Superb Range and Strength
* Bluetooth Password: “ 5004 ”
* “Pause” & “Play”
* Music “Next” & “Previous” selection
* Volume controller “Up” & “Down”
5
6
7
(not included)
321 4
MIN MAX
MIN MAX
CH
CH
HI PASS
FILTER
5
1 32 45
To Next Page
Loading...
