Cadet 4F1000-1 User Manual

cadetheat.com Tel: 360-693-2505 PO Box 1675 Vancouver, WA 98668-1675
Benets You Can Depend On
SAVE THESE INSTRUCTIONS
Electric Baseboard Heater
Owner’s Guide
6¾"
17.15cm
2½"
6.35cm
Side
Front
3¾"
9.53cm
3¾"
9.53cm
TOOLS REQUIRED:
• Phillips Screwdriver
• Straight Screwdriver
• Wire Strippers
• Drill or Hammer
• Drill Bits
• (4) Wood Screws
• Wire Connectors
• Strain Relief Connector
• Practical design is silent and built to last
• Easy installation with pre-punched
knockouts at 1-inch intervals
• Universal wiring available on either left or
right end
• Place under a window for convection to
naturally circulate warm air in your room
• Rest easy—includes high-temperature
safety shutoff feature
• Durable, powder-coated nish stands up to
nicks and scratches
• Your Cadet electric baseboard heater has
been thoroughly tested and is guaranteed
with a limited lifetime warranty
Electric Baseboard Models
Line
Voltage
Model Watts Amps
120
2F500-1 500 4.2
3F750-1 750 6.3
4F1000-1 1000 8.3
6F1500-1 1500 12.5
208
2F500-8 500 2.4
3F750-8 750 3.6
4F1000-8 1000 4.8
5F1250-8 1250 6.0
6F1500-8 1500 7.2
8F2000-8 2000 9.6
8F2500-8 2500 12
240
(1)
2F350 350 1.5
2F500 500 2.1
3F750 750 3.1
4F1000 1000 4.2
5F1250 1250 5.2
6F1500 1500 6.3
8F2000 2000 8.3
8F2500 2500 10.4
8F2025 2000/2500 8.3/10.4
10F2500 2500 10.4
(1)
240 volt models can be used at 208 volts. Wattage equals 75% of 240v rated
wattage.
http://www.cadetheat.com/products/baseboard-heaters/baseboard
Note: A wall thermostat or built-in thermostat kit is
required for comfortable warmth and control
Page 1

Cadet 4F1000-1 Specifications

General

Brand	Cadet
Model	4F1000-1
Category	Electric Heater
Language	English

Summary

Important Instructions

About the Cadet Electric Baseboard

Product overview explaining zonal heat and safety features.

A Thermostat is Required

Requirement for a thermostat for optimal performance and control.

Placement

Guidance on ideal installation locations and clearance requirements.

Wiring

Information on wiring connections from either the left or right side.

Voltage on All Models is Important

Critical importance of matching heater voltage to power supply.

Wiring for Model 8F2025

Specific wiring details for the multi-watt Model 8F2025.

Installation Instructions

Step 1 Mount Heater to Wall

Instructions for physically mounting the heater securely to the wall.

Step 2 Baseboard Wiring

Detailed steps for correctly connecting the electrical supply wires to the heater.

Standard Baseboard Wiring on Right Side

Wiring instructions for standard baseboards on the right side.

Standard Baseboard Wiring on Left Side

Wiring instructions for standard baseboards on the left side.

Multi-Watt Baseboard Wiring on Right Side Model 8F2025 Only

Wiring instructions for the 8F2025 model on the right side.

Multi-Watt Baseboard Wiring on Left Side Model 8F2025 Only

Wiring instructions for the 8F2025 model on the left side.

Baseboard Wiring with a Wall Thermostat - Optional

Optional wiring configurations for connecting the heater with a wall thermostat.

Single Pole Wall Thermostat

Wiring guide for connecting a single-pole wall thermostat to the heater.

Double Pole Wall Thermostat

Wiring guide for connecting a double-pole wall thermostat to the heater.

Multiple Baseboard Wiring - Optional

Guidance for wiring multiple baseboard heaters together on one circuit.

Multiple Baseboard Wiring. 240V Supply Only

Specific wiring instructions for 240V supply with multiple baseboards.

Operating Instructions

How to Operate Your Heater

Steps for operating the heater using a thermostat for temperature control.

Maintaining Your Heater

Procedure for cleaning and maintaining the heater for optimal performance.

Troubleshooting Chart

Warranty

Details regarding the limited lifetime warranty and its coverage.

Parts and Service

Information on obtaining replacement parts and professional service.

Reduce-Reuse-Recycle

Information regarding product recyclability and environmental impact.