Cadet 4F1000 User Manual

cadetheat.com Tel: 360-693-2505 PO Box 1675 Vancouver, WA 98668-1675
Benets You Can Depend On
SAVE THESE INSTRUCTIONS
Electric Baseboard Heater
Owner’s Guide
6¾"
17.15cm
2½"
6.35cm
Side
Front
3¾"
9.53cm
3¾"
9.53cm
TOOLS REQUIRED:
• Phillips Screwdriver
• Straight Screwdriver
• Wire Strippers
• Drill or Hammer
• Drill Bits
• (4) Wood Screws
• Wire Connectors
• Strain Relief Connector
• Practical design is silent and built to last
• Easy installation with pre-punched
knockouts at 1-inch intervals
• Universal wiring available on either left or
right end
• Place under a window for convection to
naturally circulate warm air in your room
• Rest easy—includes high-temperature
safety shutoff feature
• Durable, powder-coated nish stands up to
nicks and scratches
• Your Cadet electric baseboard heater has
been thoroughly tested and is guaranteed
with a limited lifetime warranty
Electric Baseboard Models
Line
Voltage
Model Watts Amps
120
2F500-1 500 4.2
3F750-1 750 6.3
4F1000-1 1000 8.3
6F1500-1 1500 12.5
208
2F500-8 500 2.4
3F750-8 750 3.6
4F1000-8 1000 4.8
5F1250-8 1250 6.0
6F1500-8 1500 7.2
8F2000-8 2000 9.6
8F2500-8 2500 12
240
(1)
2F350 350 1.5
2F500 500 2.1
3F750 750 3.1
4F1000 1000 4.2
5F1250 1250 5.2
6F1500 1500 6.3
8F2000 2000 8.3
8F2500 2500 10.4
8F2025 2000/2500 8.3/10.4
10F2500 2500 10.4
(1)
240 volt models can be used at 208 volts. Wattage equals 75% of 240v rated
wattage.
http://www.cadetheat.com/products/baseboard-heaters/baseboard
Note: A wall thermostat or built-in thermostat kit is
required for comfortable warmth and control
Page 1

Cadet 4F1000 Specifications

General

Wattage	1000W
Thermostat	Built-in
Mounting Type	Wall
Heater Type	Electric Fan Forced
Heating Method	Fan Forced
Heating Capacity	3412 BTU/h

Summary

Benefits You Can Depend On

Important Safety Instructions

About the Cadet Electric Baseboard

Overview of the heater's design, safety features, and operation principles.

Thermostat Requirement

Importance of using a thermostat for optimum performance and temperature control.

Installation Placement

Guidelines for selecting the ideal location to install the baseboard heater.

Wiring Considerations

Important notes regarding electrical connections and voltage compatibility.

Model 8F2025 Wiring

Specific wiring instructions for the multi-watt Model 8F2025.

Installation Instructions

Step 1: Mount Heater to Wall

Detailed procedure for securely mounting the baseboard heater to the wall structure.

Installation Instructions (continued)

Step 2: Baseboard Wiring

Procedures for connecting electrical supply wires to the baseboard heater.

Standard Baseboard Wiring

Wiring instructions for standard baseboard models on right and left sides.

Multi-Watt Baseboard Wiring Right Side

Wiring for Model 8F2025 on the right side, including wattage selection.

Installation Instructions (continued)

Multi-Watt Baseboard Wiring Left Side

Wiring instructions for Model 8F2025 on the left side.

Baseboard Wiring with Wall Thermostat

Instructions for connecting the heater to single or double pole wall thermostats.

Multiple Baseboard Wiring

Guidelines for wiring multiple baseboard heaters in parallel on a circuit.

Operating Instructions

How to Operate Your Heater

Steps for setting the thermostat and controlling room temperature.

Maintaining Your Heater

Recommended maintenance procedures for cleaning and upkeep.

Troubleshooting Chart

Warranty Information