To Next PageTo Next Page
Need help?Do you have a question about the Cadet 6F1500-1 and is the answer not in the manual?
General| Model | 6F1500-1 |
|---|---|
| Wattage | 1500 W |
| Voltage | 240 V |
| Finish | White |
| Safety Features | Overheat Protection |
| Mounting Type | Wall |
| Thermostat | Built-In |
Explains the product's design for zonal heat and safety features, including a high-temperature limit switch.
States a thermostat is required for optimal performance, recommending Cadet wall or built-in thermostat kits.
Recommends placement under windows or near outside doors for best results, with specific clearance instructions.
Discusses wiring possibilities from either side and the importance of locating supply wires before mounting.
Emphasizes verifying supply wire voltage matches heater voltage to prevent damage or reduced output.
Details specific wiring for the multi-watt Model 8F2025, including wattage selection instructions.
Step-by-step guide on securely mounting the heater to wall studs, including knockout and strain relief connector usage.
Explains the wiring process, including voltage verification and connecting supply wires to heater wires.
Provides wiring diagrams for standard baseboard models on the right and left sides for 120V or 240V supply.
Details wiring for the 8F2025 model, including factory settings and wattage configuration instructions.
Guides on wiring baseboards with single or double pole thermostats, referring to separate thermostat instructions.
Instructions for wiring multiple baseboards in parallel on the same circuit, recommending one control per room.
Explains how to control room temperature using a thermostat and notes on initial start-up odors.
Provides instructions for cleaning and maintaining the heater every 24 months, including safety precautions.
