The system will go
off
after a four-minute heating cycle.
If you shift out of
PARK
(P),
the system will only cycle
for
two
minutes. If
you
want it to cycle again, press the
button. It will
go
on
for two-minute cycles after that. If
the
windshield has cleared before the cycle is over, you
can
turn
it
off
by pressing
the
button again.
Use the defroster feature
to
clear fog from
the
windshield as previously described.
There is a metal film in the windshield which will block
out some radio or microwave signals. Therefore, the
heated windshield will reduce the useful range of
devices such as garage door openers and radar detectors.
(In
certain states, radar detectors
are
legal.)
Do
not use the
DE-ICE
button
if
your vehicle has a
cracked windshield.
A
crack will not allow the system to
function properly. Have the windshield repaired before
using the DE-ICE button again.
Defogging and
Defrosting
On cool, humid days, use DEFOG
to
keep the
windshield and side windows clear. Use DEFROST to
remove
fog
or ice from the windshield quickly in
extremely humid
or
cold conditions.
7
Press
the
DEFOG
or
DE-ICE
button and adjust
the
fan
speed by pressing the
fan
button up or down.
If
you use
DEFROST, adjust
the
fan speed the same way. If
you
select
DEFROST
from AUTO, the
system
will control
the
fan
speed. The temperature will also need to be
adjusted to your comfort level. Press the blue button to
decrease the temperature and the red button to increase
the temperature.
Note that recirculation is not available
in
the defrost or
defog modes.
-0
1
3-8
To Next Page
Loading...
Need help?
General
