c-
c-
c
To
begin programming, press the
INFORMATION
and
RESET
buttons at the same time. The first prompt to
appear is
AUTOMATIC DOOR LOCK?.
You
must
press the
RESET
button when this prompt appears to
continue programming the doors. The next prompt
to
appear is
ENABLE ALL DOORS
FOR
LOCK
AND
UNLOCK?.
This selection locks all doors when shifting
out of
PARK (P)
and unlocks all doors when shifting
back into
PARK (P).
DISABLE
ALL.DOORS
FOR
LOCK
AND
UNLOCK?
is used when
you
do not want
any automatic lock functions. The
ENABLE ALL
LOCKS AND DRIVER
DOOR
UNLOCK?
prompt
locks all doors when shifting out
of
PARK
(P)
and
unlocks
only
the driver’s door when shifting back into
PARK (P). ENABLE ALL DOORS
FOR
LOCK
ONLY?
selection appears next. This prompt is used to
lock all
doors
when shifting out of
PARK
(P)
and keeps
the doors locked when you shift back into
PARK
(P).
A
yes or no response must be programmed when a
prompt is displayed.
A
yes response selects the prompt
and a no response displays the
next
prompt.
c
When you finish programming the
door
locks, the next
prompt to appear is for the vehicle storage mode. For
more information on vehicle storage, see “Battery Guard
Storage” later in this section.
Rear
Door
Security
Locks
Your
Cadillac is equipped
with rear door security
locks that help prevent
passengers from opening
the rear doors
of
your
vehicle from the inside.
To
use this lock:
1.
.Move the lever on the door all the way up to the
2.
Close the door.
ENGAGED position.
3.
Do
the
same
thing to the other rear door lock.
The
rear doors of your vehicle cannot
be
opened
from
the inside when this feature is in use.
When
you
want to open a rear
door
when the security
lock is on:
1.
Unlock the door from the inside.
2.
Then open the
door
from the outside.
2-5
To Next Page
Loading...
Need help?
General
