Follow these steps to reinstall the
air
cleaner assembly:
1.
2.
3.
4.
5.
Slide the air cleaner lid into the slots in the front
edge of the
air
cleaner base.
Pivot the air cleaner cover and the
air
duct assembly
downward. Make sure that both latches are secure
and fully engaged.
Reinstall the clean air duct
over
the
mass
airflow
sensor. Make sure that the duct is secure around the
entire outer edge of the sensor.
Tighten the air duct clamp.
Reconnect the
IAT
sensor.
Refer to the Maintenance Schedule
to
determine when to
replace the air filter.
See “Scheduled Maintenance Services”
in
the
Maintenance Schedule booklet.
I
A
CAUTION:
Operating the engine with the air cleaner
off
can
cause you or others to be burned. The
air
cleaner
not only cleans the air, it stops flames if the
engine backfires.
If
it isn’t
there,
and the engine
backfires, you could be burned. Don’t drive with
it
off,
and be careful working on the engine with
the
air
cleaner
off.
NOTICE:
If
the
air
cleaner
is
off,
a
backfire can cause
a
damaging engine fire. And, dirt can easily get
into your engine, which will damage it.
Always
have the air cleaner in place when you’re driving.
6-16