Headlamp
1.
Lift the cover to gain access.
2.
Turn
the headlamp housing socket counterclockwise
to unlock the socket from the lamp housing.
4.
Install the new bulb and socket to the wiring harness
connector. Make sure that the harness
is
locked to the
bulb socket.
5.
Reinstall the headlamp housing socket back into the
headlamp assembly.
3.
Disconnect the socket
from
the harness by separating
the locking clip.
Do
not touch
the
glass portion
of
the new
halogen
bulb!
The
oil
from
your fingers
will
shorten the bulb life.
6-30
c
.I
c*
To Next Page
Loading...
