P
tl
3.
Just before it reaches the end, give it
a
quick pull.
4. Let the belt go back all the way.
You
should hear a
slight clicking sound.
If
you don’t, the adjustment
feature won’t set, and
you’ll have
to start again.
’‘A
....
..
5.
Now you
can
add
a
small amount
of
slack. Lean
forward slightly, then sit back.
If
you’ve added more
than
1
inch
(25
mm)
of
slack, pull
the
shoulder belt
out as you did before and start again.
If
you move around in the vehicle enough,
or
if
you pull
out the shoulder belt, the belt will become tight again.
If
this happens, you can reset it.
1-15
To Next Page
Loading...
