Turn
Signal
On
Chime
If your turn signal
is
left on for more than
3/4
of a mile
(1.2 km), a chime will sound at each flash of the
turn signal and the message TURN SIGNAL
ON
will
also appear in the
DIC. To
turn the chime and message
off, move the turn signal lever
to
the off position.
Headlamp High/Low-Beam Changer
$0
io
(Headlamp High/Low Beam Changer):
To
change the headlamps from low
to
high beam, push the
lever toward the instrument panel.
To
return
to
low-beam headlamps, pull the multifunction lever toward
you. Then release it.
When the high beams are
on, this indicator light
on
the instrument panel
cluster will also be on.
Flash-to-Pass
This feature lets you use your high-beam headlamps
to
signal a driver in front of you that you want
to
pass.
It
works even
if
your headlamps are in the automatic
position.
To use
it,
pull the turn signal lever toward you, then
release it.
If
your headlamps are in the automatic position or on
low beam, your high-beam headlamps will turn on.
They’ll stay on as long as you hold the lever toward you.
The high-beam indicator on the instrument panel
cluster will come on. Release the lever to return
to
normal operation.
3-8
To Next Page
Loading...
