2.
I
Pull
the seatback
release lever upward
and pull the seatback
up and fold
it
down until
it is flat. Escalade
lever shown,
Escalade
ESV
lever
similar.
On the Escalade ESV models,
you
must first remove
the headrest and store it on the top of the seat cushion
as shown next.
Pull the headrest out from the seatback and slide the
pins into the holes provided in the top of the seat
cushion.
If
the seatback cannot fold flat because it interferes with
the cushion, try moving the front seat forward and/or
bringing the front seatback more upright.
1-23
To Next Page
Loading...
