Adding a Waypoint
To add a waypoint to your route, do the following:
1. Touch Add Waypoint.
2. Enter a destination. See Enter Destination on
page 2-18.
A map will appear showing the location of the
waypoint.
3. Touch Enter to add your waypoint.
4. Touch the ADD screen button to insert the waypoint
in the desired order.
5. The system will display the ROUTE INFORMATION
screen. From this screen, several options are
available.
List: Touch List to view the waypoint on the map or to
change the order of the waypoints and final destination.
To change the order, touch CHG ORDER, then
touch the blank screen button next to the destination to
select the order of the waypoints and final destination.
Press the MAP key to view the destination and
waypoints on the map screen.
Delete: Touch Delete to delete a waypoint or the
final destination. A confirmation window will appear.
Touch YES to delete the point or NO to return to
the previous screen.
Delete All: Touch Delete All to delete all of the
waypoints and the final destination. A confirmation
window will appear. Touch YES to delete all waypoints
or NO to return to the previous screen.
Change: Touch Change to change the final destination.
Enter a destination. See Enter Destination on page 2-18.
Add: Touch Add to add additional waypoints. Refer to
the steps for adding a waypoint listed previously in
this section.
Calculate: Touch Calculate to begin route calculation.
This feature will only be available if the final destination
has been set.
2-15
To Next Page
Loading...
Need help?
General
