The turn list will read from bottom to top. The bottom
street name is the street you are currently on.
The system automatically updates this screen as you
make each turn. You may also touch the scroll up
and down arrows providing scroll is available.
Touching the down arrow will bring you to your current
location. Touching the up arrow will give you upcoming
streets. At times, there may not be names available
for entrance or exit ramps.
To avoid a turn, touch AVOID next to the turn you want
to avoid. You can use REDUCE or ENLARGE to edit
the avoided point. Touch Reroute or press the MAP key
to calculate your new route.
Touch Return to view your current position and to turn
the turn list screen off.
Touch REROUTE or press the MAP key to calculate a
new route.
Auto Reroute
When your destination is set and you travel off of the
planned route, the system will automatically begin
to reroute you. You will see the new route highlighted
on the screen.
Traveling Across Regions
If you plan to drive across several states, you may have
to change the selected region to represent the area
you are traveling to.
There are two ways you can plan a destination when
traveling across regions.
The following method is suggested and provides the
most route guidance and map display functions:
1. Change the selected search area region when
you get closer to the area you are traveling to.
See “Setting the Search Area” under Maps
on page 2-30.
2. Enter your destination and route settings.
See Enter Destination on page 2-18
for more information.
2-37
To Next Page
Loading...
Need help?
General
