«TUNE/SEEK ª: Press the up or down arrow to go
to the next or previous station and stay there.
BAND: Press this key to switch between AM, FM1,
FM2, XM1, and XM2, if equipped. If you are on a map
screen and press this key, the menu will not change,
but the audio source will.
Preset selection: This feature allows you to program
local presets which you can recall by touching
HOME. You may also program presets while you are
traveling to another area and store them under AWAY.
See “Preset Station Menu” later in this section for
more information.
The Home and Away feature is not available for the
XM™ Satellite Radio audio source, if equipped.
Display Presets on the Map: This feature allows your
audio system presets for the current audio source to
be displayed on the left of a map screen. Touch ON to
turn this feature on. You may also choose to turn
this feature off.
Automatic Volume Control (AVC): If your vehicle has
the Bose system, this feature allows your audio
system to monitor noise in the vehicle. AVC will
automatically adjust the volume level so that it always
sounds the same to you. To use AVC, touch ON.
You may also choose to turn this feature off.
3-3
To Next Page
Loading...
Need help?
General
