DSP Front Seat: This command will change the audio
system’s DSP to the front seat setting.
DSP Spacious: This command will change the audio
system’s DSP to the spacious setting.
DSP Talk: This command will change the audio
system’s DSP to the talk setting.
DSP Ambience: This command will change the audio
system’s DSP to the ambience setting.
Seek Up: This command will cause the selected audio
source to seek up to the next strongest signal.
Seek Down: This command will cause the selected
audio source to seek down to the next strongest signal.
Stop Scan: This command will cause the audio
source to stop scanning for the next strongest signal.
CD Changer Commands
Track Up: This command will cause the CD changer to
skip up to the next track.
Previous Track, Track Down: This command will
cause the CD changer to go to the previous track.
Phone Command
Phone: This command will activate the factory-installed
optional cellular phone system or OnStar
®
system.
See the Cellular Phone System manual and “OnStar
®
System” in Section 2 of your vehicle’s owner manual for
more information.
Screen Commands
Screen Day Mode, Day Mode On: These commands
will adjust the system’s screen setting to the day mode.
Screen Night Mode, Night Mode On: These commands
will adjust the system’s screen setting to the night mode.
Screen Auto Mode, Auto Mode On: These commands
will adjust the system’s screen setting to auto mode.
Screen Off: This command will turn the system’s
screen display off.
4-4
To Next Page
Loading...
