Then, to use this destination entry method, do the
following:
1. Touch N or S next to LAT. to enter the direction of
the latitude coordinate.
2. Input the numeric portion of the latitude coordinate
using the keypad.
3. Touch E or W next to LONG. to enter the direction
of the longitude coordinate.
4. Input the numeric portion of the longitude coordinate
using the keypad.
5. Once both coordinates are entered, touch the OK
screen button.
A map screen will then appear with the destination
marked.
See “Getting Started on Your Route” later in this section
for more information.
Preset Destination
The preset destination entry method allows you to set a
destination by choosing from one of five previously
stored destinations. Besides home, these are the only
destinations available to set while the vehicle is
moving or by voice recognition. If a destination is not
set for one of the screen buttons, the button will
be dimmed and will not be available.
j (Preset Destination): Touch this screen button to
access the PRESET DESTINATIONS screen.
2-18
To Next Page
Loading...
Need help?
General
