Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with the
optional words in brackets. To use the voice commands,
refer to the instructions listed previously.
Display Commands
Display [set] language English: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to English. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] language UK English: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to UK English. Once the language is
changed, a command to return to another language
must be made using the selected language or from the
Language menu under the CONFIG MENU. See
Configure Menu on page 2-49 for more information.
Display [set] language French: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to French. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] language Spanish: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to Spanish. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] language German: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to German. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
4-5
To Next Page
Loading...
Need help?
General
