Display [set] language Italian: This command
instructs the system to change the display (instrument
panel cluster, HUD, and Navigation System display),
Navigation System voice prompt and voice recognition
language to Italian. Once the language is changed,
a command to return to another language must be made
using the selected language or from the Language
menu under the CONFIG MENU. See Configure Menu
on page 2-49 for more information.
Display [set] English units: This command instructs
the system to switch to English units of measurement.
All display settings will change.
Display [set] metric units: This command instructs the
system to switch to metric units of measurement. All
display settings will change.
Display [set] day mode: This command instructs the
system to switch the system display to day mode.
See “Screen Appearance” under Configure Menu on
page 2-49 for more information.
Display [set] night mode: This command instructs the
system to switch the system display to night mode.
See “Screen Appearance” under Configure Menu
on page 2-49 for more information.
Display [set] auto mode: This command instructs the
system to switch the system display to auto mode.
See “Screen Appearance” under Configure Menu on
page 2-49 for more information.
Display Help: This command instructs the system to
offer assistance with the previously listed display
commands. The Navigation System will display the
commands on the screen.
General Navigation Commands
A list of the commands will be displayed on the screen
while the vehicle is stopped. The following are
commands you can access by clearly stating the
commands exactly as they are written:
Navigation [show] current position, navigation
[show] current location: This command instructs the
system to show your vehicle’s current position on
the map.
Navigation [show] map: This command instructs the
system to show the current map screen.
Navigation [command] help, navigation [command]
list: This command instructs the system to state
the navigation command help list.
Navigation repeat [voice] [guidance]: This command
instructs the system to repeat the previous voice
guidance prompt.
Cancel: This command instructs the system to cancel
the most recently given command.
4-6
To Next Page
Loading...
Need help?
General
