S (Next Turn): Touch this symbol to change guidance
mode to display mode guidance on the map screen when
under Route Guidance. This mode allows you to see
more of the map screen and displays a small guidance
window with the direction and distance of the upcoming
maneuver.
T (Next Maneuver): Touch this symbol to display
only the next maneuver along with a small map of the
maneuver.
c (Highway Guidance): Touch this symbol to display
highway guidance on the map screen. The Navigation
System will go into this mode any time you have a route
on a freeway, unless you change it manually. When in
this mode, the Navigation System provides the upcoming
exit number, distance to the exit, and available POIs at
the exit. You can use the up and down arrows to scroll
through the list displayed. Select an exit to view available
POIs and select the map button to go to that location on
the map.
h (Destination): Touch this symbol to set the current
route as the final destination.
o (Waypoint): Touch this symbol to enter a waypoint
along the current route. This allows you to have
more than one destination planned at a time.
N (Memory Point): Touch this symbol to store the
location on the screen as a memory point. The memory
point will be stored in the Marked Point folder/category.
W (Back): Touch this screen button to return to
the previous page.
F (Cancel): This screen button will return you to the
Navigation menu.
2-46
To Next Page
Loading...
Need help?
General
