The information in the system may not always be
complete. Road conditions such as prohibited turns,
detours, and construction zones, change frequently. It is
important to consider whether you can follow the
directions given by the system for the current conditions.
Each time you first start your vehicle and turn on the
navigation system by touching the map hard key,
you will see this screen. You can touch Agree to
proceed into the system, or the globe symbol in the
lower left corner of the screen to change the language
of the system. For more information on changing
the language, see Personalization on page 5-2.
When getting started you may set the navigation system
to your preference using various options. To do so,
reference the following topics:
• To adjust screen appearance, see “Screen
Appearance” under Configure Menu on page 2-49.
• To adjust the clock and other time options,
see “Clock” under Configure Menu on page 2-49.
• To plan a route, see Enter Destination on page 2-6.
• To adjust the volume of voice guidance prompts
or voice recognition, see “Navigation Set Up”
under Configure Menu on page 2-49.
1-4
To Next Page
Loading...
