Preset Destination
The preset destination entry method allows you to set a
destination by selecting from one of five previously
stored destinations. Besides voice tagged destinations,
these are the only destinations available to set while
the vehicle is moving. If a destination is not set for one
of the screen buttons, the button will be dimmed
and will not be available.
To use the preset destination entry method, do the
following:
1. Select the desired preset destination from the
Destination Entry screen. The screen buttons
are labeled with the name that was selected for the
destination when it was stored.
2. Select the route preference (Fastest, Shortest, or
Other). The system will calculate the route and the
route will be highlighted.
3. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
Getting Started on Your Route
Once you have entered a destination there are several
functions that can be performed. Press the DEST
hard key to access the Route screen.
2-20
To Next Page
Loading...
Need help?
General
