AUTO DOOR UNLOCK
This feature allows you to select whether or not
the door(s) will automatically unlock. It also allows
you to select which doors and when they will
automatically unlock. See Programmable
Automatic Door Locks on page 100 for
more information.
Press the customization button until AUTO DOOR
UNLOCK appears on the DIC display. Press
the set/reset button to access the settings for this
feature. Then press the menu up/down button
to scroll through the following settings:
OFF: None of the doors will automatically unlock.
DRIVER AT KEY OUT: Only the driver’s door
will unlock when the key is taken out of the
ignition.
DRIVER IN PARK: Only the driver’s door will
unlock when the vehicle is shifted into PARK (P).
ALL AT KEY OUT: All of the doors will unlock
when the key is taken out of the ignition.
ALL IN PARK (default): All of the doors will
unlock when the vehicle is shifted into PARK (P).
NO CHANGE: No change will be made to this
feature. The current setting will remain.
Choose one of the available settings and press
the set/reset button while it is displayed on the DIC
to select it.
REMOTE DOOR LOCK
This feature allows you to select the type of
feedback you will receive when locking the vehicle
with the Remote Keyless Entry (RKE) transmitter.
You will not receive feedback when locking the
vehicle with the RKE transmitter if the doors are
open. See Remote Keyless Entry (RKE) System
Operation on page 92 for more information.
Press the customization button until REMOTE
DOOR LOCK appears on the DIC display. Press
the set/reset button to access the settings for
this feature. Then press the menu up/down button
to scroll through the following settings:
OFF: There will be no feedback when you press
the lock button on the RKE transmitter.
LIGHTS ONLY: The exterior lamps will flash when
you press the lock button on the RKE transmitter.
254
To Next Page
Loading...
Need help?
General
