Front Seats
Power Seats
The power seat
controls are located
on the outboard side
of the seats.
• Move the seat forward or rearward by sliding
the control forward or rearward.
• Raise or lower the front part of the seat cushion
by moving the front of the control up or down.
• Raise or lower the rear part of the seat cushion
by moving the rear of the control up or down.
The front seats also have power reclining
seatbacks. See Power Reclining Seatbacks on
page 13.
If your vehicle has the memory feature, you can
program and recall memory settings for seat
positions. See Memory Seat, Mirrors and Steering
Wheel on page 11.
Power Lumbar
The power lumbar
controls are located on
the outboard side of
the front seats behind
the power seat controls.
Press the lumbar control forward to increase
support and rearward to decrease support.
Press the top or bottom of the control to raise
or lower the support mechanism.
The ignition does not need to be on for the power
lumbar feature to work.
Keep in mind that as your seating position changes,
as it may during long trips, so should the position of
your lumbar support. Adjust the seat as needed.
9
To Next Page
Loading...
Need help?
General
