Setting the Clock
The navigation system time and the analog clock are
separate features. Changing the time through the
navigation system will not change the time on the analog
clock and vice versa. See “Analog Clock” in the Index
of your vehicles owner manual to change the analog
clock time.
To set the time:
1. Press the CONFIG key to enter the menu options,
then press the CONFIG key repeatedly until the
time is selected or touch the clock screen button
located in the upper right corner of the screen.
2. Press the Hours and Minutes – (minus) and
+ (plus) signs to decrease and to increase
the time.
12/24 HR Format: Select the 12 HR screen button
for standard time; select the 24 HR screen button
for military time.
DD/MM or MM/DD Format: Press the + (plus) or
− (minus) display buttons to increase or decrease the
MM, DD, and YYYY date display.
Auto GPS Update: Press either the On or Off display
buttons. If On, the GPS update feature will automatically
update the date and time.
Daylight Savings: Press either the On or Off display
buttons. Press On to jump ahead for daylight savings
time. Press Off to fall back out of daylight savings time.
Time Zone: Auto GPS Update must be off before
the time zone can be changed. Select the change
display button to select the desired time zone.
2-41
To Next Page
Loading...
Need help?
General
