Storing Radio Station Presets
This feature allows you to store up to 36 preset stations.
You can mix AM, FM, and XM (if equipped). To store
presets, do the following:
1. Press the
O (power) knob to turn the system on.
2. If viewing a map screen, touch the source
screen button, press the AUDIO key, or press the
FAV (favorite) key.
3. Select the band.
4. Seek or tune to the desired station, to select the
station.
5. Press and hold one of the preset screen buttons
for more than one and a half seconds.
6. Repeat the steps for each preset.
To change the number of preset pages, see “Number of
Preset Pages” under “Radio Menu” later in this section.
Sound Menu
TONE or CONFIG (Configure): Press this knob or
press the CONFIG key to access the Sound menu to
adjust the treble, midrange, bass, fade, balance,
and Digital Signal Processing (DSP).
TREBLE: Touch the plus (+) or minus (−) sign to
increase or decrease the treble. If a station is weak or
noisy, decrease the treble.
MID (Midrange): Touch the plus (+) or minus (−) sign
to increase or decrease the midrange.
BASS: Touch the plus (+) or minus (−) sign to increase
or decrease the bass.
3-5
To Next Page
Loading...
