Adjusting the Speakers
L/R (Left/Right) (Balance): To adjust the balance
between the left and the right speakers, touch and hold
the L or R screen buttons.
Front/Rear (Fade): To adjust the fade between the
front and the rear speakers, touch and hold the Front or
Rear screen buttons.
Digital Signal Processing (DSP)
If the system has Digital Signal Processing (DSP), DSP
is used to provide a choice of five different listening
experiences. DSP can be used while listening to
the audio system. The type of DSP selected is displayed
on the status screen.
Select from the following DSP settings:
Normal: Select this screen button to adjust the audio to
be in normal mode. This provides the best sound
quality or all seating positions.
Driver: Select this screen button to adjust the audio to
give the driver the best possible sound quality.
Rear: Select this screen button to adjust the audio to
give the rear seat occupants the best possible sound
quality.
Centerpoint
®
: Select this screen button to turn on
Bose Centerpoint. Centerpoint produces a full vehicle
surround sound listening experience from a CD,
MP3/WMA, DVD, AUX (auxiliary) input, or XM stereo
digital audio source and will deliver five independent
audio channels from the conventional two channel
stereo recordings. This is not available for AM or FM.
5.1 Surround: 5.1 Surround sound processing is
available for DVD-A/DVD-V sources that were recorded
in 5.1 surround.
• 5.1 Surround + Normal: Best for all seating positions.
• 5.1 Surround + Rear: Best for the rear seating
position.
3-6
To Next Page
Loading...
