Random Off: This command instructs the system
to turn off random play.
Repeat Track On: This command instructs the
system to play the currently selected track again.
Repeat Disc On: This command instructs the
CD changer to play the current CD again once all
the tracks have played.
Repeat Off: This command instructs the system
to turn off the repeat feature.
DVD Commands
Play: This command instructs the system to play
a DVD from the disc menu screen or if the
movie has been stopped or paused.
Pause: This command instructs the system to
pause a DVD.
Next Track: This command instructs the system
to advance to the next chapter on a DVD.
Previous Track: This command instructs the
system to reverse to the previous chapter
on a DVD or to re-start the current chapter if it has
been less than five seconds since the current
chapter started.
Eject Disc: This command instructs the system to
eject the DVD.
Voice Memo Commands
The following are verbal commands that can be
used when the Voice Memo screen is active.
Memo Play: This command instructs the system
to play the memo currently highlighted on the
screen.
Memo Play X: This command instructs the
system to play a memo saved to a specific location
that is not the memo currently highlighted on the
screen. To use this command, you must know
the location of the memo you wish to hear.
For example, if you want to hear the memo saved
to location three, say “memo play three.”
Memo Stop: This command instructs the system
to stop playback of a memo.
Memo Record: This command instructs the
system to begin recording a memo.
Memo Append: This command instructs the
system to add to the memo currently highlighted
on the screen.
99
To Next Page
Loading...
