Cadillac XT4 - Page 231

Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-15440913) - 2022 -
CRC - 5/13/21
230 DRIVING AND OPERATING
* : Press to disengage the Speed
Limiter while keeping the last set
speed in the memory.
SET− : Press to choose set speed,
decrease set speed (Manual),
or decrease offset (Intelligent).
+RES : Press to resume set speed,
increase set speed (Manual),
or increase offset (Intelligent).
Turn Speed Limiter On and Off
(Intelligent and Manual)
Press the
s button. The Speed
Limiter will start in Manual mode. To
switch to Intelligent mode, press the
s button. To turn Speed Limiter off,
press
s again.
Setting Speed Limiter (Manual)
Press SET− to activate the Speed
Limiter and use the current vehicle
speed as the set speed.
Setting Speed Limiter (Intelligent)
Press SET− to activate the Speed
Limiter. The set speed will be the
current vehicle speed until the vehicle
identifies an area speed limit
road sign.
Resuming Speed Limiter
If Speed Limiter was previously active
but was disengaged with the
*
button, Speed Limiter can be resumed
using the last set speed. Press +RES to
reactivate Speed Limiter with the last
set speed.
Accept or Decline Automatic Set
Speed Changes (Intelligent)
When Speed Limiter is in Intelligent
mode, the vehicle can suggest a new
set speed if a new area speed limit
road sign is identified.
Press SET− to accept the suggested set
speed.
Press +RES to ignore the suggested set
speed.
Decreasing Set Speed (Manual)
While Speed Limiter is active, the set
speed can be decreased using the
SET− button.
Press SET− to decrease the set speed
by 1 km/h (1 mph).
Hold SET− to decrease the set speed
by 5 km/h (5 mph).
Decreasing Set Speed (Intelligent)
While Speed Limiter is active, the
offset from area speed limit can be
decreased using the SET− button.
Press SET− to decrease the set speed
by 1 km/h (1 mph).
Hold SET− to decrease the set speed
by 5 km/h (5 mph).
Increasing Set Speed (Manual)
While Speed Limiter is active, the set
speed can be increased with the +RES
button.
Press +RES to decrease the set speed
by 1 km/h (1 mph).
Hold +RES to decrease the set speed
by 5 km/h (5 mph).
Increasing Set Speed (Intelligent)
While Speed Limiter is active, the
offset from the area speed limit can be
increased using the +RES button.
Press +RES to decrease the set speed
by 1 km/h (1 mph).
Hold +RES to decrease the set speed
by 5 km/h (5 mph).